Barra de Impacto: - Impact bar is an important cushion part.
- Slow down the material on the conveyor belt and the impact damage, avoid sharp objects for tape tearing and scratches.
- Used in belt conveyor material guiding groove, blanking point below the belt.
- Outstanding capability to absorbing impact and low friction coefficient.
 
| Technical Data Sheet of Impact Bar | | Description | Unit | Specification | | Cover properties | Cover material | | UHMWPE | | Grade | Molecular Weight | >=4,000,000 | | Color | - | Green/Blue/White | | Specific Gravity | g/cm3 | 0.94 | | Friction Coefficient | | 0.07 | | Tensile Strength | Mpa | 30 | | Rubber cushion compound | Elongation | % | >=350 | | Specific Gravity | g/cm3 | 1.27 | | Hardness | ShoreA | 60+/-5 | | Adhesion | UHMWPE&Rubber | N/mm | 6 | | Rubber&Aluminium part | N/mm | 6 |
Model: Specification | Height | Width | Length | (mm) | (mm) | (mm) | (mm) | | 1220*100*50 | 50 | 100 | 1220 | | 1220*100*75 | 75 | 100 | 1220 | | 1220*100*100 | 100 | 100 | 1220 | | 1400*100*50 | 50 | 100 | 1400 | | 1400*100*75 | 75 | 100 | 1400 | | 1400*100*100 | 100 | 100 | 1400 | | 1524*100*50 | 50 | 100 | 1524 | | 1524*100*75 | 75 | 100 | 1524 | | 1524*100*100 | 100 | 100 | 1524 | | 1600*100*50 | 50 | 100 | 1600 | | 1600*100*75 | 75 | 100 | 1600 | | 1600*100*100 | 100 | 100 | 1600 | | 1800*100*50 | 50 | 100 | 1800 | | 1800*100*75 | 75 | 100 | 1800 | | 1800*100*100 | 100 | 100 | 1800 |
Cama de impacto:
 
Superficie Material: UHMW, PE
Superficie de color: verde, blanco, azulymarrón
Tipo: General, High elástico, Resistente al Fuego
Selección del modelo: Anchura de la Cinta
(mm) | Bar número | Distancia
(mm) | Rodillo ancho | | Izquierda | Centro | derecha | ambos lados | Centro | (mm) | | 550 | 1 | 2 | 1 | 50 | 0 | 200 | | 650 | 2 | 2 | 2 | 25 | 25 | 250 | | 800 | 2 | 3 | 2 | 50 | 5 | 315 | | 1000 | 3 | 3 | 3 | 25 | 25 | 380 | | 1200 | 3 | 4 | 3 | 55 | 20 | 465 | | 1400 | 4 | 5 | 4 | 45 | 7 | 530 | | 1600 | 5 | 5 | 5 | 25 | 25 | 600 | | 1800 | 5 | 6 | 5 | 25 | 10 | 670 | | 2000 | 6 | 6 | 6 | 20 | 250 | 750 |
Impacto Perno bar
 Tipo: M16-40;M16-50;M16-60 
|
